Several Ethernet sockets in this period home in the Bray area did not work. Their cables led to a loose patch panel in a cupboard. The homeowner already had four in-wall Wi-Fi access points ready to fit, one for each floor.

The customer wanted the equipment organised, the faulty points repaired and her four existing in-wall access points installed. Our home network repair work focused on bringing the existing connections back into use and completing a tidy setup.

Replacing the loose patch-panel arrangement

We removed the old patch panel and installed a communications cabinet inside the cupboard. This brought the network equipment and connections into an organised arrangement, with a much tidier finish and easier access for managing the connections.

The photographs show the change from a loose panel and tangled leads to equipment housed in the cabinet.

Loose patch panel and tangled network cables in the cupboard before the work
Before: the patch panel and connecting cables sat loose inside the cupboard.
Communications cabinet and organised network equipment inside the cupboard
After: the network connections are housed in a communications cabinet inside the cupboard.

Testing and repairing the Ethernet points

We tested the Ethernet points and repaired those that were not working. That restored the wired connections around the property and provided the network links needed for the access points.

This was a repair of the existing installation. The house already had the cables; the work was to make its connections useful and organise the equipment serving them.

For another example of completing an unfinished network, see how we terminated 16 Cat6 cables and connected a new-build home.

Installing the customer’s four access points

With the wired network working, we fitted the four in-wall access points the customer already owned, placing one on each floor. This made use of her equipment alongside the property’s existing cabling.

The old building had thick walls, so providing an access point on each level brought Wi-Fi coverage to the parts of the house where it was needed.

Customer-owned in-wall access point installed beside sockets on a book-patterned wall
One of the four access points the customer already owned, fitted after the network points were repaired.

By handover, the repaired sockets worked and each floor had Wi-Fi from one of the homeowner’s access points. The cabinet now holds the connections that had been loose in the cupboard.

Need an existing home network put right?

If your Ethernet sockets do not work, your network cupboard is untidy or you have equipment waiting to be installed, tell us what is already there. We can check the connections, explain what can be reused and plan the remaining work.

Ask about network cabling, repairs and cabinet installation.