The room sockets were already fitted in this County Wicklow new build, but plugging a device into one gave the homeowner no network connection. The missing work was at the other end of the cables, in the communications cabinet.

Our network cabling work focused on completing that existing installation and using it to provide Wi-Fi around the house.

Why the data sockets were not ready to use

Having Ethernet sockets fitted is only part of a home network. The cable ends need to be terminated and connected to the equipment that carries traffic between the rooms and the broadband router.

In this property, the comms room still needed that work. We terminated 16 existing Cat6 cables and installed a PoE network switch. These were cables already built into the house, rather than 16 new cable runs.

The switch provides a central connection point for the network. It also supplies power to the access points through the same network cables that carry their data.

If your new home has a similar issue, our guide explains why Ethernet sockets may need a network switch and further connection work.

Using the existing wall points for Wi-Fi

At three key locations, we replaced the Ethernet wall sockets with compact in-wall access points. Each unit provides Wi-Fi nearby and Ethernet sockets for compatible devices that need a wired connection.

This made use of the cabling already in the walls and kept the access points neatly positioned at the existing data points. The homeowner gained Wi-Fi coverage along with the option to plug equipment directly into the network.

Compact in-wall Wi-Fi access point beside a television
One of three in-wall access points installed at existing Ethernet socket locations.
In-wall access point on a finished room wall beside an electrical socket
The access points add local Wi-Fi coverage while retaining an Ethernet connection option.

Completing the missing parts of the installation

Terminating 16 Cat6 cables and connecting them to the switch put the existing room wiring into service. At three of the wall points, the homeowner gained both local Wi-Fi and a port for a wired device.

Every property needs a check of what is already in place. In another new home, the main work was organising the switch in a network cabinet and adding one access point per floor.

Are your new home’s Ethernet sockets inactive?

We can check the cabinet, cable terminations and room connections, identify what is missing and plan the next steps. Where you also need better coverage, we can combine that work with home Wi-Fi installation.

Ask about completing your home network.